Now we are going to start getting into the weeds of leveraging docker. I think an easy way to start this one would be with a user story. So here we go.

As a developer I would like to have an environment to develop that alleviates the "Works on my box" problem. It should work just the same on my box as it does in production. I shouldn't be able to install something in my environment that doesn't exist when I deploy my app to production. Any other developer should be able to pick up my app and develop the exact same way without a huge time sink spent getting their environment to look just like mine.

Pipe dreams, am i right?

Lets see how we can pull this off with docker.

Most languages these days support some sort of live reload to allow developers to instantly make a change and have it running live for them to play with. So lets start out by adding that functionality to our little API.

Running The Container

Running this container so that we can actually work inside it with our editor is going to take a bit more than we've done before. We are actually going to leverage an image we haven't built ourselves this time. Lets take look at the image we are going to use. cosmtrek/air. Please take a minute to explore the image link if you haven't explored Dockerhub before. The Overview tab will give you a rundown of how to use the image. The Tags tab will show you different tags you can consume. So if we scroll down on the overview you will see how to run it The Docker Way. So lets do that.

First we need to pull the image down.

docker pull cosmtrek/air

If we wanted to consume a specific tag then we could do that as well. Just make sure you also use that tag in the following docker run command.

Lets add a little config for air so that it will cleanup for us when its done. In $projectRoot/go-rest-api/, lets add .air.conf and fill it with the following then save.

# .air.conf
# Config file for [Air](https://github.com/cosmtrek/air) in TOML format

# Working directory
# . or absolute path, please note that the directories following must be under root.
root = "." 
tmp_dir = "tmp"
[build]
# It's not necessary to trigger build each time file changes if it's too frequent.
delay = 1000 # ms
# Stop to run old binary when build errors occur.
stop_on_error = true
[color]
# Customize each part's color. If no color found, use the raw app log.
main = "magenta"
watcher = "cyan"
build = "yellow"
runner = "green"

[misc]
# Delete tmp directory on exit
clean_on_exit = true

Now lets run this image and load our code into on the fly

docker run -it --rm\
    -w /app/ \
    -v `pwd`/go-rest-api:/app/ \
    -p 8080:10000 \
    cosmtrek/air \
    -c .air.conf

Theres a lot going on there. So lets break it down.

docker run: We've seen this before. Just the base command to run a container

-it: This is the shorthand way to declare --interactive --tty that we discussed earlier

--rm: This will cleanup the filesystem that our container creates. Normally this persists. But we really don't want that happening. Whenever we start this we want make sure its fresh with just the code we are working with.

-w: Just like in our Dockerfile. This lets us declare WORKDIR

-v: This is short for --volume This will mount our $projectRoot/go-rest-api at /app inside the container. the pwd\ is just a little shorthand to get our present working directory. Otherwise we would have to declare the full path of what we want to mount inside the container.

-p 8080:10000 Port mapping just like before.

cosmtrek/air Declaring the image we want to use.

-c .air.conf Because we declared -it we are able to pass parameters to ENTRYPOINT of the container. We are leveraging this to pass in the configuration file we created.

You should have gotten an output like this.

$ docker run -it --rm\
    -w /app/ \
    -v `pwd`/go-rest-api:/app/ \
    -p 8080:10000 \
    cosmtrek/air \
    -c .air.conf

  __    _   ___  
 / /\  | | | |_) 
/_/--\ |_| |_| \_ // live reload for Go apps [v1.11.1]

mkdir /app/tmp
watching .
!exclude tmp
building...
running...
Starting Web Server
Preparing to handle requests
Ready for requests

So looking at this right off the bat. We see that it spun up v1.11.1. Thats old. Lets do this again using a version tag to run a newer version. (If you are doing this later. You may have gotten a different version. But at the time of writing. It looks like new images are being pushed but latest isn't being updated)

docker run -it --rm\
    -e GO111MODULE=off
    -w /app/ \
    -v `pwd`/go-rest-api:/app/ \
    -p 8080:10000 \
    cosmtrek/air:v1.15.1 \
    -c .air.conf

You'll notice this time. We skipped the pull step. Yay Shortcuts. There was one other little thing we added.
-e GO111MODULE=off: GO111MODULE in its most simplest terms tells go whether to look for and require go modules. Getting into all of that really isn't the point of this. But if you are curious, this blog was a great read.

But we are running again. And look. Our go version is more recent

$ docker run -it --rm\
    -e GO111MODULE=off \
    -w /app/ \
    -v `pwd`/go-rest-api:/app/ \
    -p 8080:10000 \
    cosmtrek/air:v1.15.1 \
    -c .air.conf

  __    _   ___  
 / /\  | | | |_) 
/_/--\ |_| |_| \_ v1.15.1 // live reload for Go apps, with Go 1.15.5

mkdir /app/tmp
watching .
!exclude tmp
building...
running...
Starting Web Server
Preparing to handle requests
Ready for requests

So lets see if our curl still works.

curl localhost:8080

Output:

$ curl localhost:8080
Hello From integratnio

Great the app is still working. Now lets make a code change and watch the live reload do its thing.

Making a change

Open up $projectRoot/go-rest-api/main.go. On line 11 you will see message declared. Lets change the value of that line and save the file. Feel free to change it to anything you want. But I'm going to change it to Yay we did it

Watch the terminal running your dev container when you hit save.

main.go has changed
building...
running...
Starting Web Server
Preparing to handle requests
Ready for requests

Magic.

Lets test that curl request again.
Output:

$ curl localhost:8080
Yay We Did It

Look at that. This is just one example of how to do this. For a node app you could use npm run dev:watch as your entrypoint and get a similar effect. Pick your code flavor and I bet you could figure out a way to do this.