TheLazy.Dev
Portfolio GitHub

Blog

prometheus |rapberrypi |monitoring |grafana

Monitoring With Prometheus: Experiments With a Raspberry Pi

danielesalatti

Daniele Salatti

Posted on December 30, 2020

Monitoring With Prometheus: Experiments With a Raspberry Pi

Code available on GitHub here: DanieleSalatti/Prometeo

What Is Prometheus

Prometheus is cool software used for event monitoring and alerting. It includes a time series database used to record real-time metrics, it has a pretty flexible query language and alerting functions. It scrapes metrics over HTTP using a pull model - which has some advantages in terms of scaling compared to a push model (more on this in a future post).

Requirements

  • Docker on a PC or laptop
  • A Raspberry Pi (or ARMv6/v7 boards)

You can get a Raspberry Pi from here if you don't have one already:

The links above are for the Raspberry Pi only. You'll also need a power source, an SD card, a micro-HDMI to HDMI adapter, and optionally an enclosure. Sometimes it's worth to get it all as a bundle, so here's a couple links:

I have the 8GB kit from the last link and can vouch for them.

Preparing the Docker Image

Well, actually, before we build our Docker image we need a way to test our Prometheus instance when we run it locally. That's a pretty simple thing to do as all we need it to set up a NodeExporterinstance. A NodeExporter is a simple local service that exposes an HTTP endpoint (usually on port 9100) and publishes a set of system/hardware metrics, allowing Prometheus to scrape it.

I am going to set up my NodeExporter on my Raspberry Pi(s), but you can set it up locally or on any instance/VPS you want to monitor.

Set up a NodeExporter Instance

Let's start by installing a NodeExporter:

 pi@televisione:~ $ sudo apt-get install prometheus-node-exporter
Enter fullscreen mode Exit fullscreen mode

Once the installation process finishes, we can test out endpoint:

pi@televisione:~ $ curl localhost:9100/metrics | less
Enter fullscreen mode Exit fullscreen mode

You should see a bunch of metrics being emitted. Done.

Create a New Docker Image

Thankfully for us there already is a Prometheus image on Docker Hub, so all we need to do is change the config file to suit our needs.

Extract default config file from Docker image:

$ docker create --name prom_empty prom/prometheus
$ docker cp prom_empty:/etc/prometheus/prometheus.yml ./prometheus.yml
Enter fullscreen mode Exit fullscreen mode

Use your favorite editor and open ./prometheus.yml. You'll see a block similar to this:

# A scrape configuration containing exactly one endpoint to scrape:
# Here it's Prometheus itself.
scrape_configs:
  # The job name is added as a label `job=<job_name>` to any timeseries scraped from this config.
  - job_name: 'prometheus'

    # metrics_path defaults to '/metrics'
    # scheme defaults to 'http'.

    static_configs:
    - targets: ['localhost:9090']
Enter fullscreen mode Exit fullscreen mode

We are going to add our endpoints in the scrape_configs section. So let's add our test endpoint (comments removed for readability):

scrape_configs:
  - job_name: 'prometheus'
    static_configs:
    - targets: ['localhost:9090']
  - job_name: 'televisione'
    static_configs:
      - targets: ['192.168.1.224:9100']
Enter fullscreen mode Exit fullscreen mode

The second job name is called "televisione" because that Raspberry Pi is attached to my smart TV (TV = televisione in Italian). Feel free to change that name. Now we need to create our Dockerfile, telling Docker to copy our config file over for Prometheus to use. Here's the content:

FROM prom/prometheus
COPY ./prometheus.yml /etc/prometheus/prometheus.yml
Enter fullscreen mode Exit fullscreen mode

And finally we need to build our image:

$ docker build -t prometheus/cluster-local .
Enter fullscreen mode Exit fullscreen mode

Once the command succeed we can run Prometheus:

$ docker run -p 9091:9090 --restart=always --name prometheus-local -d prometheus/cluster-local
Enter fullscreen mode Exit fullscreen mode

Note that I'm redirecting port 9091 from the host to port 9090 on the container. That's because I am going to have another Prometheus instance running on that Raspberry Pi as part of a separate tool that I'll discuss in a follow up post. You can leave it as 9090:9090 if you prefer.

When you want to stop the container type in: docker rm -f prometheus-local. Remember that if you make any change to the config file, you will need to build the image again, then stop the container and run it again as above.

Now you can go to http://localhost:9091/ and see Prometheus up and running. Click on Status -> Targets in the top menu to see a list of targets. There should be only two at the moment:

  1. The local Prometheus instance and
  2. The test NodeExporter we setup earlier

Deploying to the Raspberry Pi

Install Docker on your Raspberry Pis. Instructions here will differ depending on the OS. I'll cover Raspbian and Ubuntu server, since that's what I have.

Install Docker on Ubuntu Server

Do not use the install script, do it properly. Instructions here and below in a shortened version.

In essence what we have to do is install a few dependencies first, then add the Docker repository to our repository list, and finally install Docker.

$ sudo apt-get update

$ sudo apt-get install \
    apt-transport-https \
    ca-certificates \
    curl \
    gnupg-agent \
    software-properties-common

 $ curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
Enter fullscreen mode Exit fullscreen mode

Remember to always validate any key you get from the Internet. You can do so by looking for the last 8 digits of the fingerprint:

$ sudo apt-key fingerprint 0EBFCD88

pub rsa4096 2017-02-22 [SCEA]
      9DC8 5822 9FC7 DD38 854A E2D8 8D81 803C 0EBF CD88
uid [unknown] Docker Release (CE deb) <docker@docker.com>
sub rsa4096 2017-02-22 [S]
Enter fullscreen mode Exit fullscreen mode

If the fingerprint looks like this one you are good to go: 9DC8 5822 9FC7 DD38 854A E2D8 8D81 803C 0EBF CD88

I have installed Ubuntu 64 bit on my Raspberry Pis 4 (8 GB RAM), so to add the repository I need to type this:

sudo add-apt-repository \
   "deb [arch=arm64] https://download.docker.com/linux/ubuntu \
   $(lsb_release -cs) \
   stable"
Enter fullscreen mode Exit fullscreen mode

If you have a different architecture you need to replace arm64 with armhf or amd64 depending on what you have.

And finally:

 $ sudo apt-get update
 $ sudo apt-get install docker-ce docker-ce-cli containerd.io
Enter fullscreen mode Exit fullscreen mode

Install Docker on Raspbian

Unfortunately with Raspbian we cannot use the repository, so we need to use the convenience script:

$ curl -fsSL https://get.docker.com -o get-docker.sh
$ sudo sh get-docker.sh
Enter fullscreen mode Exit fullscreen mode

Start Prometheus

Now that we have Docker running, we can copy our config and Docker file over to the Raspberry Pi and start our container. For convenience, I uploaded everything we need in this GitHub repository: https://github.com/DanieleSalatti/Prometeo

If you do check that out, remember to change your config files. It would probably be a good idea to create a fork, so you can track your own changes there.

Once everything is moved over to the Pi, all that's needed is to build and run our image again:

$ docker build -t prometheus/cluster-local .
$ docker run -p 9091:9090 --restart=always --name prometheus-local -d prometheus/cluster-local
Enter fullscreen mode Exit fullscreen mode

Data Persistence

Docker volumes aren't the best way to persist data, so I added a little script in the GitHub repository to start our Prometheus image in a slightly different way. The script is called run.sh. Let's quickly take a look:

#! /bin/bash
mkdir -p /media/usb-ssd-1/prometeo # creates a folder for your data
ID=$(id -u) # saves your user id in the ID variable

docker run -p 9091:9090 --restart=always \
--user $ID \
--volume "/media/usb-ssd-1/prometeo:/prometheus" \
--name prometheus-local -d prometheus/cluster-local
Enter fullscreen mode Exit fullscreen mode

As you can see, at the top of the file we create a new folder (if it doesn't already exist - the -p parameter takes care of that). After that we start our image, but there's one additional parameter that we pass to docker run: --volume "/media/usb-ssd-1/prometeo:/prometheus". That allows us to specify a mount-point on our host for a folder in our container. We also run our image with our own user, and that's to ensure that we have the correct read/write permissions for the folder we just created. Be sure to change the run.sh file to suit your needs before attempting to start it.

Grafana

Little bonus: in the GitHub repository I also included a second little script to run a Grafana image. No additional config is needed since Grafana can be configured from the UI itself. Just like the previous script it will attempt to create a folder and start the image with a volume mapped to that folder for data persistence. Be sure to tweak it as needed.

Oh, and be sure to import this dashboard once you start playing with your data. It's pretty well done.

What About Alerting?

I'm not going to look at the alerting section for now, but given that this will be a series remember to tune in and check for updates. Better yet, subscribe :)

Alright, that's it for now.

💖 💪 🙅 🚩
danielesalatti
Daniele Salatti

Posted on December 30, 2020

Join Our Newsletter. No Spam, Only the good stuff.

Sign up to receive the latest update from our blog.

Related

Monitoring With Prometheus: Experiments With a Raspberry Pi
prometheus Monitoring With Prometheus: Experiments With a Raspberry Pi

December 30, 2020